Game of thrones S04E01 Two Swords HBO HD

Game of thrones S04E01 Two Swords HBO HD

gmaes of thrones s04e01 HD Hbo two swords

https://www.youtube.com/watch?v=mxynfdR5Yzs

kickass.so eurreur DNS page web n'existe pas resolus

The Pirate Bay a fait couler beaucoup d’encre ces dernières semaines, mais il est loin d’être le seul à proposer les… hem… prestations qu’il propose. La vérité, c’est qu’il existe des centaines et même des milliers de sites du même acabit et KickAssTorrents en fait justement partie. Même qu’il a rencontré lui aussi quelques problèmes avec son extension. De gros problèmes, même, si vous voulez tout savoir.

S’il vous arrive d’utiliser bittorrent pour télécharger des distributions Linux (forcément), alors vous savez sans doute que la plateforme en question était jusque là disponible à l’adresse kickass.so.

Mais voilà, depuis ce week-end, cette ligne sonne dans le vide. Pire, en balançant un petit whois, on se rend même compte que le nom de domaine a été littéralement banni des internets.

KickAssTorrents se promène maintenant au Tonga

Pourquoi ? Toute la question est là, et on ne le sait pas pour le moment. Toutefois, et si l’on en croit ce qui se murmure dans le milieu, alors le site aurait fait l’objet d’une attaque orchestrée par nos amis ayant-droits et ces derniers auraient fait pression sur la Somalie pour qu’elle raye le nom de domaine de sa carte.

Ce n’est évidemment pas la première fois que KickAssTorrents change de crèmerie. Loin de là, même. Ses administrateurs n’ont d’ailleurs pas tardé à répliquer en achetant un nom nom de domaine au… Tonga. Le site est donc accessible à présent à l’adresse kickass.to. Une lettre de différence, ça va, on a déjà vu pire.

Moralité, il ne vous reste plus qu’à mettre à jour vos bookmarks. Parce que bon, ce serait quand même dommage de ne pas pouvoir télécharger la dernière Debian, ou même la dernière Mint, hei

how to install hackintosh Yosemite with intel and AMD

OS X Yosemite (10.10) is the latest OS X release of 2014 by apple,
but Apple locks the operating system to only be installed in genuine Apple computers known as Macintosh & they cost a lot
any how there is always a way if you want to install the operating system in your common pc, without paying high cost for a real mac you can make a Hackintosh
if you're interested then this guide is for you, Please read all Instructions
Welcome to Hackintosh Zone

Few Notes about this OSX Yosemite Zone 10.10 & 10.10.1 (Intel & AMD Supported)
Standalone Installer (This image also can be used with a genuine mac as a standalone Installer)
LGA 2011 Partial Support (Go for 10.10.1 Image)
MBR Patched
Trim Patched Installation and Post Installation
XPCM Patch
RTC Patch (CMOS Reset Patch)
Auto Install Audio Kexts
Auto Install Network Kexts
Installs Clover & Chameleon Boot-loader
Many more patches fixes etc, etc you'll love it 


Pen drive which is 8GB or plus

YOSEMITE DOWNLOAD

If you're using Windows currently then you can use TransMac to Restore, Download Click this link to download Transmac
Please view the video instructions to restore the image using TransMac

Now restart your computer and setup BIOS
In the Bios Menu:
If HPET is available change it to ON & set HPET Mode as 64 Bit
Set SATA as AHCI
Enable 'Executive Disable Bit' (also known as XD Technology) (Disabling this may cause Hackintosh to Reboot Instantly)
Enable 'Virtualization Technology' (also known as VT Technology)
USB Legacy to ON (If you experience some usb related issues in verbose mode try switching to OFF)
If UEFI available turn it off & Enable legacy Boot
Save BIOS settings and restart


Now Boot from the Pen drive
Chameleon Boot-loader will be loaded

AMD, Haswell and HP Laptop users may have to use custom kernel in order to make the system boot & work properly

AMD Users           : /amd
                    : /amd1
                    : /amd2
                    : /amd64
                    : /amd32 (its actually a 64 bit kernel)
                    : /amdfx (can also boot non FX Processors)

Haswell Users                    : /haswell
LGA2011 CPU / X99 Chipset        : /x99 or /x99x  [ try to add cpus=1 boot-flag too ]
HP Laptops with Intel Processors : /hp or /hp1

To use a custom kernel you just have to type the correct kernel name listed in above
example to Boot with AMD kernel
just type : /amd
then press the Enter key

Now boot From the Volume Yosemite-Zone
There is a possibility of Instant reboot for custom kernel users as the kernel may not install automatically but 99% of users doesn't need this step and safely ignore this
to fix it after Installation Do Not Reboot Open Terminal
I assume that the kernel you used as haswell and The Installation Volume where you installed Mac as "Mac OS"
(Replace following code variables with appropriate kernel and volume name)

cp -f   /Volumes/"Image Volume"/haswell   /Volumes/"Mac OS"/System/Library/Kernels/kernel
rm -rf  /Volumes/"Mac OS"/System/Library/Caches
kextcache -u  /Volumes/"Mac OS"

Then reboot
Sometimes if the USB flash light stopped after a few seconds you may have to use the following BootFlags

USBBusFix=Yes Enable the EHCI and UHCI fixes (disabled by default).
EHCIacquire=Yes Enable the EHCI fix (disabled by default).
UHCIreset=Yes Enable the UHCI fix (disabled by default).
USBLegacyOff=Yes Force USB Legacy off (disabled by default).

If it stops in a line where is says PCI Configuration Begins
try either one of the following BootFlags

npci=0x3000
npci=0x2000

Gigabyte MotherBoard users should use PCIRootUID=1 & it may solve "PCI Configuration Begins" in some cases


Sometimes booting with -x (Safe Mode may fix graphics glitching issues)
If your mother contains one of the following CPU Sockets use the appropriate BootFlags

LGA 2011: -v cpus=1 npci=0×2000 (or use) -v cpus=2 npci=0×2000
LGA 1366: -v cpus=1 npci=0×2000 (or use) -v cpus=2 npci=0×2000
LGA 1150: -v npci=0×2000
LGA 1155: -v npci=0×2000

When you get into the OS X Installation Screen
Select your language
Open Disk Utility

Select the Volume where you want to Install OS X from Left SideBar
Erase it as "Mac OS X Extender (Journaled)" - Journaled is Better (Erasing is similar to Format in Windows)


Exit the Disk Utility
In the Volume Selection menu Select the Erased Volume


Customizing the Installation Packages
Customizing may be required to resolve errors
If you have booted with any special flags example like USBBusFix=Yes, npci=0x2000, ....
then select the relevant package for it or else you have to use the same boot flag after the Installation

Chameleon will be installed as default boot loader but you can choose Clover if you can manage it or you can give it a try
Clover UEFI is not recommended in this release because it cause some issues in many computers

Network and Audio Kexts (Kexts are drivers) will be auto installed

Graphics may become a problem if your Graphics card or Graphics chipset is not supported
you may end in Black / Grey Screen or Monitor Turn Off Issue to resolve it ReInstall Yosemite with all the Backup Graphics Extensions package selected (If you want to resolve it without a reinstallation you can use the "grafix" solution found in this guide Click Here)

Most of the Chipset kexts are installed to ensure it boots in every system without trouble

FakeSMC is the most Required kext for Hackintosh Do not unselect it

After Customizing Click OK and Select Continue to Install

After the Installation The System will Reboot
If you run into any Installation Error Save the Installer Log to a Some Pen drive and Create a new topic in the forum (Its very important to attach the Installer Log)


After the Installation There are chances you may run into a few issues
Black / Grey Screen, Monitor Turn Off Issues & Missing Bluetooth Controller Transport
To fix reinstall with all the Backup Graphics Extensions Packages Selected or take a look at this article for a direct solution

FakeSMC: [Fatal] failed to initialize SMC device Error
Click here for the solution

DSMOS has arrived / waiting for DSMOS
Click here for the solution

Still waiting for root device
Click here for the solution

PCI Configuration Begin: to fix it you may have to boot with the following Boot Flags
npci=0x3000
npci=0x2000
(In my personal experience i was stuck in PCI Configuration Begin with the boot-arg npci=0x2000 but give it a try)

Errors (Kernel Panic) related to VooDoo HDA / AppleHDA
ReInstall & In the Customize section Unselect Auto Install Audio Kexts

Errors (Kernel Panic) related to AppleIntelE1000, AppleBCM, ALXEthernet, Brcm, Attansic and Realtek ethernet & Wifi
ReInstall & In the Customize section Unselect Auto Install Network Kexts


PS/2 Keyboard Mouse Not Working
Boot with Kernel Flag -f

In some rare cases you may loop in user account creation menu or suddenly you will be asked for username and password
Its program that runs after 10 minutes automatically to check if you have created the user account successfully
if it detects you have created an account it will Exit but if you haven't created an account with in 10 min or if you are stuck in account creation loop, Keyboard not found problem just wait 10 minutes
After that a windows will ask username and password
Username: root
Password: niresh

Enter these value Login create an administrator account and use the created administrator account for your daily needs
using OS X as root is dangerous

Note that the password will be changed to niresh only if you don't create the account with in the 10 minutes from boot
otherwise the password remains as same as the one which apple set for root account




About the rumors:
Some may say Distros are bad may contain malware, spyware that may be true
but Hackintosh.Zone previously called Niresh has been trusted for 4 years by the community of more than 90K Members
If you want to check if it contains some bad malware you can just check it by Installing Little Snitch and Monitor your Internet Traffic
This distro contains some additional kexts which you may not require and some may say that why install unnecessary kexts & stuffs
those additional stuffs be inactive if your system doesn't have the hardware but what if your mother board gone damaged and replaced with a new model, you can just simply plug the hard disk and run the OS X as same as before without Reinstalling and setting up entire computer once again
The Time of Installing Mac with a Retail DvD Image is gone, This is your Easy choice
if you trust me Im always with you
Thanks

I have spent a lot of sleepless nights while making this Installer
If this Installer helped you please consider a contribution to support further developments and maintaining Hackintosh Zone website (The current dedicated server cost 100$/month)
by donating with PayPal with USD or GDB

This Guide will be Updated with in Next Week with if some required contents
Happy Hackintoshing
Please read MacBreaker Guide too